Categories
! Без рубрики

Windows 10 inaccessible boot device nvme free download.INACCESSIBLE BOOT DEVICE after restoring 256GB M.2 SATA image to 1TB NVMe

 

Windows 10 inaccessible boot device nvme free download.INACCESSIBLE BOOT DEVICE after restoring 256GB M.2 SATA image to 1TB NVMe

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

What causes inaccessible boot device error and how to fix it?.How to Fix Inaccessible Boot Device on Windows 10 SSD?

 
 
Dec 18,  · INACCESSIBLE BOOT DEVICE after restoring GB M.2 SATA image to 1TB NVMe So my Asus QD 2 in 1 laptop came with a GB M.2 SATA SSD, and I want to upgrade it to 1TB. I have a 1TB NVME PCIe Gen 3×4 that was in my Dell that died so I want to put that drive in it. Jan 19,  · 2) Make a bootable Windows 10 iso: Download Windows 3) Insert the flash drive into any USB port. 4) Power on the computer and repetitively click the applicable keyboard key to open the BIOS boot menu. List of PC brands with their corresponding hot-keys. Sep 17,  · Restart your computer. When the startup screen appears, continuously press a specific key (usually F2, F8, F12, Del) to enter BIOS Setup. Select Boot and choose the cloned hard drive as the first boot option. Press F10 to save and exit the BIOS. Then restart the .
 
 

Windows 10 inaccessible boot device nvme free download.INACCESSIBLE BOOT DEVICE after restoring GB M.2 SATA image to 1TB – Microsoft Community

Sep 30,  · Learn how to fix inaccessible boot device on Windows 10 SSD below: Step 1. Connect a USB drive to a computer that is running Windows 10 and is in good condition. Install and launch AOMEI Partition Assistant. Click on “Make Bootable Media” on the left-hand pane and follow the wizard to complete the process. Tips: The bootable USB will Estimated Reading Time: 4 mins. Jan 19,  · 2) Make a bootable Windows 10 iso: Download Windows 3) Insert the flash drive into any USB port. 4) Power on the computer and repetitively click the applicable keyboard key to open the BIOS boot menu. List of PC brands with their corresponding hot-keys. Mar 22,  · Inaccessible boot device. Once the SATA SSD is unplugged, power the system back on again. If needed, change the BIOS settings to boot from the NVMe M.2 SSD. If you are lucky, that installation might boot straight away. In my case, I was back to the dreaded Inaccessible Boot Device blue screen of death (BSOD).
 
 
 
 

I then tried restarting in the Macrium PE and used the ‘Fix boot problems’ tool but it didn’t help. Windows Startup repair can’t do anything running off either the ‘Recovery’ partition or off a USB drive. I then installed a fresh copy of Windows 10 on the NVMe and it works fine, so there is nothing wrong with the drive or M.

How do the partition structures compare between the GB and 1TB.. Not after the image restoration, but after the fresh install on the 1TB.. It is possible that the 1TB is not set up properly to have am image from the GB drive loaded onto it, but in the process of installation to the 1TB everything clicked as far as the drive type and Bios settings..

Do either of your drives have a small mb or so “EFI” partition as or near the first partition? Was this reply helpful? Yes No. Sorry this didn’t help. Thanks for your feedback. What you describe sounds like it should work The missing Recovery partition should make no difference I’m wondering if the images are OK and your Bios was simply not switching to recognize the 1TB drive..

One thing you might try would be using the Macrium image to recover only the OS partition to the OS partition on the 1TB drive after doing a clean install on the 1TB drive again.. Just as a workaround if nothing else works..

I have previously attempted to restore just the C: partition over the Fresh install C: and have the same results. I read somewhere can’t remember where this morning that it might be a driver issue, that the Windows 10 image doesn’t have an NVMe driver installed.

Is this a possibility? If so, can I check for and or install the NVMe driver from the recovery environment? That does not necessarily mean that it is getting recognized properly when loading your image.. They are probably getting used when you do the clean install, but are not getting the chance to be loaded when trying an image..

My experience is that drivers for NVMe drives are hard to come by At least Windows 10 drivers anyway.. I have never had the chance to find out if they would work when a NVMe drive was attached later..

You could try to find 3rd party drivers and install them onto your GB drive and them image it again.. Just as a note The actual boot files used by WindowsBootManager are on the 1st mb partition, not the OS partition.. The “EFI” partition is the name it normally uses.. Choose where you want to search below Search Search the Community. Search the community and support articles Windows Windows 10 Search Community member.

This thread is locked. You can follow the question or vote as helpful, but you cannot reply to this thread. I have the same question 3.

Report abuse. Details required :. Cancel Submit. How satisfied are you with this reply? Thanks for your feedback, it helps us improve the site. In reply to slance’s post on December 18, In reply to Shadow42’s post on December 18, Hi, Do you remember how that compares to the clean install you did on the 1TB drive? I actually do not know if i is possible to install drivers through the Recovery Environment..

A subscription to make the most of your time. Try one month free. This site in other languages x.